Boost-M1 12 in. W X 30 in. H Single Medicine Cabinet without Light

This beautiful Boost M1 Medicine Cabinet I installed today is the perfect piece to my bathroom. It was real easy to “Surface Mount” and hook up electric. So very well put together and quality mirrors and love the LED Lights built into the outside mirror doors and the internal Valet LED light. There is a dial outlet and dual USB plugs for various uses.

I highly recommend this product and will be sure to talk my friends and family into this upgraded medicine cabinet.

The mirrors were installed by a professional. They look nice and make the space look larger. I wish the lights were brighter.

I purchased and installed the Boost M1 medicine cabinet in my bathroom. I couldn't be more thrilled with the product. Its installation was easy once I got the electrical line into the cavity. The unit is very well built with all the options I wanted, like outlets and lights in the cabinet, and plenty of internal space even though this is one of the smaller units. The mirror light is bright enough that I don't need to also install an overhead light. This was critical for the space I had.
I heartily recommend this medicine cabinet!

Our mirrors arrived as expected and I. Great condition. They were easy to install and look/work great. One thing to note is that we had to sign for their delivery which we had to plan around. The power cord is in the upper left corner in the back and the lead is long enough to allow you to adjust where you connect to power. We installed two mirrors side by side and I was able to locate the power junction box in the middle where the mirrors met. They need to be hard wired. Super simple and easy!

I installed three of the 36" x 30" cabinets into the same bathroom. They sure give us a lot more storage space.

I really wanted the lights on the cabinets to be controlled with our bathroom light switch, but I also wanted the outlet inside the cabinets to always be on, so that tooth brushes would always charge. I was able to disassemble the units relatively easy to create two separate power cords - one for switched power and one for GFCI protected outlet power. It works great. And the clock seems to be able to keep time, even if the unit doesn't get turned on for a week!

One thing to be aware of if you are planning to install multiple units in the same room: The "Brightness" settings are continuously variable while you hold the button down. There isn't a fixed number (say 10) brightness levels that one can switch between. This makes it difficult to get more than one unit at exactly the same brightness. I'd rather they had a clearly fixed number of levels so I could set all units to the maximum.

The same comment applies for "Color Temperature". There aren't just 5 to choose from, it varies continuously as you hold the button down. So getting three units to match was a challenge. I'd rather they had a clearly fixed number of color temperatures so I could set all units to 6000K.

One thing that is a bit odd: two of the three units display both time and temperature (switching back and forth every few seconds), while one unit just shows the time. The manual doesn't mention a temperature display at all. I have an email into ExBrite asking how to control this.

The power cord is a full-size 14AWG power cord, which comes straight out of the back of the unit. So you will want to make provisions for some sort of hole in the wall to accommodate the cable. I ended up installing a DataComm Electronics 45-0031-WH recessed outlet behind each unit. This provided a space for the cable to go, and a convenient place to make the electrical connections. https://datacommelectronics.com/product/recessed-low-voltage-media-plate-white/

The other thing that I really like is that the units came with lots of extra hole-plugs, shelf supports, and screws. If you happen to lose one during installation you won't be stuck!

Overall, very happy with the purchase.